Easy-to-follow Guide to Installing a New Shower Unit

Book Now!

What're your opinions concerning Simple ways to Install a Shower Cubicle on Your Own?

An effective shower installment calls for cautious planning and also a lot of work. For the most part, you will certainly need to do 3 types of tasks: mounting walls, setting up the plumbing, and completing walls.

Prep work

First of all, you need to pick the type of shower that you want to set up. It is essential to establish whether the chosen shower is capable of managing certain systems and also can control a secure level of water through the central heating boiler. Most shower units nowadays are designed to be versatile to various water pressures (such as stored hot water and cool mains).
It is also essential to consider the water pressure as well as the preparation of the piping and also water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose as well as spray parts of the push-on mixer shower device can be attached to the bath faucet based on your requirement, and the water temperature can be changed via the faucets. Push-on mixers are cheap as well as extremely straightforward to install. Nonetheless, although the hose pipe connection is easy, it is quickly removed. Furthermore, it is bothersome to adjust the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this sort of shower are integrated with a bath mixer tap, and also the temperature level can be changed via the bath taps. It is a really economical option as well as no added plumbing is involved. Nevertheless, the bath/shower mixers likewise deal with inconvenient temperature control alternatives.

Manual Mixer: The hose pipe as well as spray of a hand-operated mixer shower device belong of the wall surface device and the hot and cold water materials are linked to a solitary valve The temperature and pressure of the water are controlled via either one or a selection of handles (in more pricey showers). Although temperature level control is a lot easier in hands-on mixer types, they are extra pricey than the previously pointed out mixers. They additionally require added plumbing of hot and cold water system pipelines.

Thermostatic Mixer: The pipe as well as spray of this shower type belong of the wall device and the cold and hot water materials are attached to a single shutoff here as well. It is full with a built-in stabiliser to self-adjust the water temperature as well as to stop it from becoming as well hot. One of the largest advantages of a thermostatic mixer shower type includes practical temperature control. Nevertheless, it is the most expensive of the different mixer choices.

Power Shower: A power shower is a single system consisting of a powerful electric pump that is capable of altering both the water pressure as well as temperature. This type of shower can be fitted if there is supply of water from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both pressure as well as temperature level simple. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a mix central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a keys cold water supply and also it heats the water electrically. It is important to keep in mind that for this shower type to be mounted, the mains pressure needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system enables the temperature as well as stress to be changed by means of a handle. Versions with temperature level stabilisers are much better as they stay unaffected by various other faucets somewhere else being used within the household. A significant downside of electrical showers is that the control knob only allows for the option of high temperatures at much less stress, or reduced temperatures at a better stress. This is problematic in the winter season when the spray is frequently weak and the keys water is chillier. Nevertheless, this trouble is taken on in some versions which are available with a winter/summer setup.

Approach

Depending on the type of shower you wish to install, the shower head should either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it needs to have a check shutoff.
Before starting, it is a good idea to note the placements of the shower head as well as control, as well as to plan the pipe-work involved. In addition, the drainage system to get rid of the drainage will certainly need to be prepared. Both settings of the cable television course as well as the shower button will certainly also require to be taken into consideration if a rapid or electrical shower system is being mounted.
Utilize the instruction overview provided with the shower system to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to cut off the water supply. In order to protect the pipes, they need to be provided a water resistant covering and additionally fitted with isolating valves. The pipelines can then be hidden into the wall as well as plastered over to neaten the overall appearance.
Fit the base tray, shower head, and also fittings.
Connect the major shower control to the pipelines that will be providing the water (This might need a women screw string adapter).
Reconnect the supply of water and examination the pipes for any leakages, as some may require tightening.
If you are installing an electrical shower, keep in mind to switch off the power supply before making any kind of electrical links. Once these connections have actually been made (there should be advice within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower

The cold water storage tank can be raised to a higher height (in some cases as little as 150mm (6inches)) by installation a solid wooden support under it - perhaps made up of struts and blockboards. If you select this choice, the primary and distribution pipelines will certainly also need to be raised to meet the brand-new elevation of the tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it must be attached into the power supply in order to run.

Piping as well as Drainage

It is best to make use of 15mm diameter supply pipelines, and make the runs to the shower as short and straight as feasible so regarding maintain maximum pressure and reduce heat loss. Furthermore, by reducing the use of joints for pipeline edges, you can reduce the resistance in the flow of the water system. You can attain this by flexing the pipelines instead.

Most Common Mistakes

Violating or disregarding local code limitations.

Using pipes that are as well little.

Attaching copper to galvanized without utilizing a brass or dielectric suitable in between the two.

Not using tape or pipe compound at threaded joints.

Not leveling your components when installing them.

Not mounting an air gap filling up for fixtures.

Reducing supply stub outs as well short to install the shutoff valves onto after the ended up wall is in location.

Not appropriately aligning tubes into installations or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly create a leakage.).

When transforming the water back on in your house, constantly run the outdoors tube shutoff or flush your toilets to hemorrhage dirt and air from the lines. This particles can trigger issues in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed our section about How to Install a Freestand. Many thanks for spending some time to read our short article. Sharing is nice. Who knows, you will be helping someone out. We cherish reading our article about How to Install a Freestand.

Request An Estimate